-
1x HB11 Base(3,5 IS10-4P 16GB)
6x HB10 3,5 NL 4TB x 1
2x PowerCord C13-C14 3m x 1
2x HB10 FC16G/IS10G SFP x 1
1x HB10 System kit SANtricity
-
1x HB21 Base (3,5 IS10-4P 64GB)
6x AB30/HB NL 8TB x 1
2x PowerCord C13-C14 3m x 1
1x HB20/50 System kit SANtricity
4x HB20 FC 16G/iSCSI10G SFP x 1
-
1x HB21 Base (3,5 IS10-4P 64GB)
6x AB30/HB NL 12TB x 1
2x PowerCord C13-C14 3m x 1
1x HB20/50 System kit SANtricity
4x HB20 FC 16G/iSCSI10G SFP x 1
-
Fujitsu Cable Kit for RAID controller - RX2530M7
-
TX1320 M6 Supported Raid Cards: EP6XXI/CP6XXI/EP325X/CP2200
-
M.2 Boot and Adapter card in PCIe FH/LP Formfactor
For mirrored operation system boot drive
Supports 2x M.2 modules with 80mm length (not included)
The controller supports Hardware RAID1 for 2x M.2 Modules, on a single PCIe slot card for all standard
-
PLAN CP BCM5719-4P 4X 1000BASE-T PCIe
-
TX1320 M6 Supported Raid Cards: EP520I/CP500I
-
TX1330 M6 Supported Raid Cards: EP520I/CP500I
-
RX1330 M6 Supported Raid Cards: EP6XXI/CP6XXI/EP325X/CP2200
-
Fujitsu Cable Kit for RAID controller - RX2530M7
-
Fujitsu Cable Kit for RAID controller - RX2530M7
-
PLAN EP X710-T2L 2x10GBASE-T PCIE FH/LP
-
-
FBU option for PRAID EP5xx incl. 25, 55, 83cm Kabel
-
PRAID CP600i FH/LP
SAS/SATA RAID Controller based on Broadcom SAS3808
- for up to 8 internal SAS/SATA HDD, SSD
- RAID Levels 0, 1, 10
- a later change to this controller or a downgrade to other RAID controller can require different SAS cable,
- (see
-
- SAS/SATA RAID Controller based on LSI MegaRAID SAS3908
- for up to 8 internal SAS/SATA HDD, SSD
- RAID Levels 0, 1, 10, 5, 50, 6, 60
- TFM already included
- 4GB Cache
- a later change to this controller or a downgrade to other RAID controller can
-
- SAS/SATA/PCIE-NVMe RAID Controller based on LSI MegaRAID SAS3916
- for up to 16 internal SAS/SATA HDD, SSD, for up to 4 times x4 PCIe-NVMe SSD
- RAID Levels 0, 1, 10, 5, 50, 6, 60
- TFM already included
- 8GB Cache
-a later change to this controll
-
Description
SAS/SATA RAID Controller based on Broadcom SAS3408
- for up to 8 internal SAS/SATA HDD, SSD
- RAID Levels 0, 1, 10, 5, 50
- a later change to this controller or a downgrade to other RAID controller can require different SAS cable, (se
-
- SAS/SATA/PCIE-NVMe RAID Controller based on LSI MegaRAID SAS3516
- for up to 8 internal SAS/SATA HDD, SSD, for up to 2 times x4 PCIe-NVMe SSD or 4 times x2 PCIe NVMe SSD (if available)
- RAID Levels 0, 1, 10, 5, 50, 6, 60
- TFM already included
- 2
|
Příslušenství servery
